thermal-protective coating of Cement concrete pavement

来源:期刊VIP网所属分类:建筑工程发布时间:2012-03-21浏览:

  1 Introduction

  With the development of cement concrete construction technology, concrete pavement is widely used in highway, city road and airport at present.Cement concrete road surface is made of a certain thickness of concrete panel, it has the nature of the heat bilges and cold shrink.In one day, the temperature begins to rise at daytime, the temperature of the top of the comcrete is higher than the bottom,which causes the middle of the panel uplift.While the temperature begins to drop at night , the temperature of the top of the comcrete is lower than the bottom,which makes the bound of the panel uplift.The deformation will be restrained by frictional resistance and cohesion between panel and foundation,aslo the weight of the board and wheel load and so on.The cement concrete panel will destroyed because of big stress.

  Bauxites is a kind of mineral,its main ingredients is alumina containing impurities of the first of alumina .Clinker is ashen yellow and dark grey,it is widely used in high aluminum refractory high temperature resistant materials ,the thermal bauxites is good, the rate of sunshine is low.This article proves that adding a store bauxite insulating layer can have a significant on pavment through experiment.

  2 Contrast surface temperature of raw materials

  Take two of the same volume containers and fill them with the same volume, the same size bauxites and ordinary stone respectively.Gather the two kinds of material surface temperature every 10 minutes by data collector and show in figure 1. The result turns out that the temperature rate of bauxite changes slower than ordinary stone.

  figure 1 material temperature range chart

  Make two specimens and the size of the specimens are both for mould 30 cm * 30 cm x 10 cm.I set up thermal resistors at thickness 8cm.Under the condition of the same layer thickness,the experiment tests the temperature relationship between the thermal insulation layer and ordinary cement concrete. The temperature change shows Figure 2

  Figure 2 temperature contrast curve

  From the above form data and contrast curve ,the temperature of adding bauxites thermal insulation layer is lower than normal temperature range cement concrete board at 8 cm.

  According to the experiment, I can be sure that the temperature of pavement can be droped by adding bauxite insulating layer.

  References

  [1] Mingzhaohui. thermal-protective coating of Cement concrete pavement [D]. Xian: changan university

  [2]ShaAiMin, HuLiQun. Semi-rigid base material structure characteristics. China journal of highway

期刊VIP网,您身边的高端学术顾问

文章名称: thermal-protective coating of Cement concrete pavement

文章地址: http://www.qikanvip.com/jianzhugongcheng/1511.html